HP Matrix Operating Environment Software - Manual (Page 57)

Error notification on the standard out tab
While error messages are sent to the Stderr tab, the fact that errors have occurred is indicated
on the Stdout tab. The types of messages sent to the Stdout tab are explained below.
All physical CPU utilization data collected for Integrity VM "vm-name" from Integrity VM Host "host-name".
All corrected physical CPU utilization data collected for HyperV VM "vm-name".
All utilization data collected for "system-name"
Data collection succeeded. No need to check the Stderr tab if this is the only type of notification.
Some utilization data collected for "system-name"
Although data collection was not entirely successful, some utilization data was collected. Check
the Stderr tab for details of the problem.
Warning: message text.
A condition was detected while collecting that may affect the “usefulness” of the data collected.
Check the Stderr tab for details of the problem.
NN Warnings issued.
Appears at the end of output on the Stdout tab.
Warnings were issued. Check the Stderr tab for details.
Collection failed on NN systems.
Appears at the end of output on the Stdout tab.
No data was collected from one or more systems. Check the Stderr tab. For each of the failed
systems, there will be one or more messages, including the host name.
See also Appendix F (page 159) and “Capacity Advisor messages” (page 169) for additional
information to help you troubleshoot data collection errors.
As you review and analyze the resulting data collection, you may notice discrepancies. See
“Possible sources of discrepancies in collected data” (page 64) for information.
Scheduling a data collection
As conditions evolve over time or to manage data collection for large numbers of servers, you
can schedule one or more periodic data collections in addition to, or in place of, the automated
nightly collection. At the scheduled time, Capacity Advisor will pull data collected by the
Utilization Provider or via the agentless configuration file into the database on the CMS for
storage.
Prerequisites
• To create a collection schedule:
— You must be logged in to HP SIM (see
“Accessing Capacity Advisor” (page 53) ).
Procedure 5-3 To collect data on selected systems
1. Select Optimize
→Capacity Advisor→Collect Capacity Advisor Data... from the top menu
bar.
The Collect Capacity Advisor Data wizard starts.
2. Click the word - select - in the drop-down list below the title Add targets by selecting
from:
.
A list of filters is presented.
Gathering data for Capacity Advisor 57