AT&T System 85 User Manual
Page 83
CHAPTER 4. OPERATING FEATURES
lntercept tone—terminal alreadv restricted or invalid code dialed. If an invalid code
was dialed, press
[RELEASE]
, and ‘repeat the procedure.
6.
Press
[RELEASE]
.
ATND light goes off. PA light goes on.
To cancel a restriction for an individual extension number
1.
Press an idle loop button.
ATND light goes on. PA light goes off.
2 .
Press
[START]
.
Listen for dial tone.
3.
Dial the Restriction—Attendant
dial 0 (zero).
Listen for dial tone.
4.
Press the appropriate hundreds
Control of Single-Voice
group select button.
Terminal access code, and
5 . Press the DXS button for the extension number for which the restriction is to be
canceled.
Listen for tone:
Confirmation tone—restriction is canceled.
Intercept tone —invalid code dialed. Press
[RELEASE]
, and repeat the procedure.
6 .
Press
[RELEASE]
.
ATND light goes off. PA light goes on.
To activate a restriction for a group of extension numbers:
1.
Press an idle loop button.
ATND light goes on. PA light goes off.
2.
Press
[START]
.
Listen for dial tone.
4-61