AT&T System 85 - Manual (Page 79)

CHAPTER 4. OPERATING FEATURES
To
2 . Press [START] .
Listen for dial tone.
3 . Dial the MCT deactivate access code.
MCT CONT goes off.
Voice recorder is deactivated.
PBSY light goes off.
deactivate a Malicious Call Trace (activating and controlling attendant):
1. Put the MCT loop on hold.
2 . Press an idle loop.
3 .
When the trace is finished and the information is recorded, dial the code to deactivate
the MCT feature.
Music-On-Hold Access
Provides music to a held party. The System Manager should
to only the music source is provided with the system.
When Attendant Call Waiting and Music-On-Hold Access are
select the music source. Access
provided, a call extended by the
attendant to a busy single-line telephone/voice terminal is connected to music until the called
party answers or the attendant reconnects to the waiting call after the timed-reminder interval
expires.
Refer to “Placing a Caller in Call Waiting” under “Incoming Calls” for the actual procedure.
Radio Paging Access
Allows you to page individuals carrying pocket radio receivers by dialing codes to access
paging equipment and then paging individuals by voice or tone.
To access radio paging:
1. Press an idle loop button.
ATND light goes on. PA light goes off.
4-57