AT&T System 85 - Manual (Page 51)

CHAPTER 4. OPERATING FEATURES
3. Dial Console Position Number.
Listen for ringback tone. RING light goes on.
4 .
Consult with the other attendant.
5 . Press [RELEASE] .
Display, ATND, and SPLIT lights go off. You are released, and caller is connected to
the other attendant console.
To consult with another attendant when you do not have a call on your console:
1.
2.
3.
4.
5.
6.
Press an idle loop button.
ATND light goes on. PA light goes off.
Press [START] .
Listen for dial tone.
Dial Interposition Calling access code.
Listen for dial tone.
Dial Console Position Number.
Listen for ringback tone.
Consult with the other attendant.
Press [RELEASE] .
ATND and ANS lights go off. PA light goes on. You and the other attendant are
released from the call.
To answer an interposition call:
When you are called by another attendant, ATND light flashes. PR light goes on (priority
call). You hear an audible ring. Alphanumeric display shows
INTP . If you are the controlling
attendant on a malicious call trace, you will not receive a display. Trace information is
displayed.
1. Press [ANSWER] .
Audible ring stops. ATND light goes on. PR light goes off.
2.
Consult with the calling attendant.
If a call is transferred, display changes from INTP to incoming call identification.
4-29