AT&T System 85 - Manual (Page 113)

CHAPTER 5. REFERENCE CONSOLE ILLUSTRATION AND LEGEND
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
PBSY (Position Busy) Button
Places your console in a busy mode. You cannot receive incoming calls. You can,
however, originate calls.
CLASS Button
Shows the class of service (COS) on the alphanumeric display of an incoming call
from an extension number.
TRK ID (Trunk Identification) Button
Identifies a specific trunk used on an incoming or outgoing call. Also used to identify
a faulty trunk.
AFRL (Alternate Facilities Restriction Level) Button
Activates alternate facilities restriction levels.
PLAN Button
Provides for displaying or changing the plan for Automatic Route Selection (ARS).
RLT (Release Link Trunk) Button
Releases the Centralized Attendant Service (CAS) position from a Release Link
Trunk.
VERFY (Verify) Button
Allows you to check an extension signaling busy. To safeguard their privacy, voice
terminal users will hear a tone before you can check the extension.
CANCL (Cancel) Button
Releases a called extension number or trunk. Also used to silence a tone or
deactivate a feature.
SPLIT Button
Temporarily separates a caller from the connection.
SELCT Button
Selects the hundreds group (first two digits of an extension number) when Extended
DXS is used to call an extension user.
DISP Button
Displays the last selected hundreds group in the alphanumeric display when
Extended DXS is used to call an extension number.
5-4