American Dryer Corp. AD-15 Phase 7 User Manual
Page 28
26
American Dryer Corp.
113243-1
IMPORTANT:
Flexible supply line/coupling must be used.
Solenoid valve failure due to hard plumbing
connections WILL VOID WARRANTY. It is
recommended that a filter or strainer be
installed in the water supply line.
Typical water supply:
OPTIONAL MANUAL BYPASS
Provisions are made in the dryer S.A.F.E. system for the
installation of an optional manual bypass. Depending on
the model dryer, the connections for the manual bypass are
made at the T or four way fitting located in the outlet supply
side of the water solenoid valve. The use and connections of
this manual bypass are at the option or discretion of the owner.
The water connection for the manual bypass is made to the
T or four way fitting which has a 3/8 F.P.T. and a coupling
must be used to provide the minimum 1/2 supply (feed)
line.
If the rear area of the dryer, or the water supply is located in an
area where it will be exposed to cold/freezing temperatures,
provisions must be made to protect these water lines from
freezing.
!