Canon Color imageCLASS MF9220Cdn - Manual (Page 40)

38
1 Settings Necessary to Use the Machines Functions
Network (Manual):
(See “Set IP Address Manually,” on p. 36.)
Restart the “Setup Guide”:
→ * → → . (See “Introduction of
the Machine,” in the e-Manual.)
* If the screen appears prompting you to enter the System Manager ID and System Password, enter the
System Manager ID and System Password using - (numeric keys), then press (Log In/Out). For
details, see “Security,” in the e-Manual.
The machine may enter the Standby mode (default setting is 2 minutes) or the Sleep mode (default setting is 15 minutes)
while you are performing setup.
To change the settings, see “Introduction of the Machine” in the e-Manual.
●
●