Canon Color imageCLASS MF9220Cdn - Manual (Page 37)

35
1 Settings Necessary to Use the Machines Functions
4
Make sure the following screen is displayed on
the display, then press [ OK ] to proceed to the
“Setup Guide.”
If the machine does not get the IP address, subnet mask and
gateway address, each of the screen displays
“000.000.000.000.”
5
Make sure the following screen is displayed on
the display, then press [ OK ] to proceed to the
“Setup Guide.”
See “Network Settings,” in the e-Manual.
6
Make sure the following screen is displayed on
the display.
Go to “Finish ‘Setup Guide’,” on p. 36.
If there are any undefined items, a screen appears before
this screen listing the undefined items.