Canon Color imageCLASS MF9220Cdn - Manual (Page 11)

9
1 Settings Necessary to Use the Machines Functions
Connect Power Cord and Turn on the Machine
1
Connect the power cord to the rear socket on
the back side of the machine and to the wall
outlet, and press the [I] side of the main power
switch (A) to ON.
Make sure all shipping tape/packing materials on the
machine and tabs/tape on the toner cartridges have been
removed.
Do not connect the machine and the computer with a
USB cable at this time. Connect the machine and the
computer with a USB cable only during the software
installation procedure. (A USB cable is not used when the
machine is used via a network connection.)
If you want to use the optional paper drawer, connect the
Cassette Feeding Unit-AC1 to the machine before turning
on the machine. (For instructions on how to connect the
Cassette Feeding Unit-AC1, see “Cassette Feeding Unit-
AC1 Setup Instruction.”)
Apply the power switch label to the space above the main
power switch. –
–
–
–
2
If the screen to select the language appears as
shown below, use [▼], [▲] or (Scroll Wheel)
to select a language, then press [ OK ].
The machine restarts automatically.
The language setting can be changed later.
Press
(Main Menu) → →
Settings> → → → Select
→ Select the desired language → Turn OFF the main power →
Restart the machine.