Canon XA10 - Manual (Page 91)

Assignable Buttons
91
Assignable Buttons
The camcorder conveniently features 2 buttons to which you can assign various functions. By
assigning often used functions, you can quickly access them with a single press of a button.
Changing the Assigned Function
1 Open the selection screen for the desired assignable button.
[FUNC.] [MENU] 6 [Assign Button 1] or [Assign Button 2]
2 Select the desired option and then touch [a].
Options (

Default value for assignable button 1,

default value for assignable button 2)
Using an Assignable Button
After you assign a function to one of the buttons, press the button to activate the function.
Operating modes:
[ BLC Always On] Turns backlight correction on/off.
[ Face Only AF] Turns face only autofocus on/off ( 0 54).
[ Story Creator] Activates Story Creator mode ( 0 105).
[ Z Video Snapshot] Turns video snapshot on/off ( 0 85).
[ m WB Priority] Turns white balance priority on/off ( 0 153).
[ Y IR Light] Turns the infrared light on/off ( 0 89). The handle unit must be attached to use this
option.
[ Audio Output CH] Switches the audio output channel ( 0 153). The handle unit must be
attached to use this option.
[ AF/MF] 
Switches between autofocus and manual focus ( 0 51). This option is available only
for assignable button 1.
[ Powered IS]  Turns Powered IS on/off ( 0 60). This option is available only for assignable
button 2.
[ B Off] Does not assign a function to the assignable button.
COP
Y