Canon XA10 - Manual (Page 38)

Using a Memory Card
38
Selecting the Memory for the Recordings
You can select to record your movies and photos in the built-in memory or on a memory card. The
default memory for recording both is the built-in memory.
POINTS TO CHECK
• Be sure you understand the information provided in Eye-Fi Cards ( 0 37) before using an Eye-Fi
card.
1 Open the [Rec Media for Movies] or [Rec Media for Photos] screen.
[FUNC.] [MENU] 8 [Rec Media for Movies] or [Rec Media for Photos]
2 Touch [f] (built-in memory), [4] (memory card X) or [7] (memory card Y) and then
touch [a].
• When selecting the memory, you can check the approximate available recording time/number of
photos, based on currently used settings.
NOTES
• Select to record movies in the built-in memory or memory card X if you later want to convert the
movies to standard definition in order to upload them to the Web.
Relay Recording
You can activate relay recording so if the memory you are using becomes full while recording movies,
the recording will continue uninterrupted on a memory card.
When recording on memory card X, you can use memory card Y for relay recording (497). When
recording in the built-in memory, you can choose to use only memory card X for relay recording
(f94), or use both memory cards (f9497).
1 Insert a memory card that contains no video recordings into the card slot of the memory
card you want to use for relay recording.
• When relay recording from the built-in memory: memory card slot X or both memory card slots.
• When relay recording from memory card X: memory card slot Y only.
2 Open the relay recording screen.
[FUNC.] [MENU] 8 [Rec Media for Movies] [f] or [4] [Relay Recording]
3 Touch the desired option and then touch [a].
• The approximate available recording time will now reflect the combined space in the memories
used for relay recording.
Operating modes:
Operating modes:
COP
Y