Canon EOS C300 PL - Manual (Page 67)

67
ISO Speed/Gain
Remote Operation Using Wi-Fi Remote
After completing the necessary preparations (A 49), you can adjust the ISO speed/gain remotely from a Wi-Fi-
enabled device using the Wi-Fi Remote application.
1 To change the gain value, press [ISO] and then [Gain] on the Wi-Fi Remote screen.
2 Press the current ISO speed or gain value and select the desired value from the list.
• You may need to scroll up/down to see all the available values.
• The selected value will be displayed on the Wi-Fi Remote screen and will be applied on the camcorder.
NOTES
• When high ISO speeds or gain levels are set, the picture may flicker slightly.
• When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such
case, use a faster shutter speed (A 62) or select a lower ISO speed or gain value.
• When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not
adjust the ISO speed/gain level while recording.
• When an optional RC-V100 Remote Controller is connected to the camcorder, you can adjust the ISO speed
or gain value with the remote controller’s ISO/GAIN Н/О buttons.
COP
Y