beautypg.com

Cop y – Canon EOS C300 PL User Manual

Page 119

background image

119

Custom Picture Settings

[Low Key Satur.]

Adjusts color saturation in dark areas.

[Enable]: Activates/deactivates the setting. (Default: [Off])

[Level]:

Specifies how saturated colors are in dark areas. This setting can be adjusted from -50 to 50.
(Default: ±0)

[Knee]

Controls the upper part of the gamma curve (highlights of the image). By compressing the highlights, you can
prevent parts of the image from being overexposed. When [Gamma] is set to [Cine 1], [Cine 2], [EOS Std.], [Wide
DR] or [Canon Log], this setting has no effect on the picture.

[Enable]:

Activates/deactivates the setting. (Default: [On])

[Slope]:

Determines the slope of the gamma curve above the knee point. This setting can be adjusted from
-35 to 50. (Default: ±0)

[Point]:

Sets the knee point of the gamma curve. This setting can be adjusted from 50 to 109. (Default: 95)

[Saturation]: Adjusts color saturation in highlights. This setting can be adjusted from -10 to 10. (Default: ±0)

[Sharpness]

Sets the sharpness of the output and recording signal.

[Level]:

Sets the sharpness level. This setting can be adjusted from -10 to 50. (Default: ±0)

[H Detail Freq.]: Sets the center frequency of horizontal sharpness. Setting higher values increases the

frequency, which, in turn, increases the sharpness. This setting can be adjusted from -8 to 8.
(Default: ±0)

[Coring]:

Reduces noise artifacts caused by high sharpness levels.

Input

Outp

ut

Point

Black Gamma

Input

Outp

ut

Input

Ou

tp

u

t

Knee Slope

Knee Point

COP

Y

This manual is related to the following products: