Canon EOS C300 PL - Manual (Page 126)

Playback
126
* For clips recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will both be displayed.
v
Switching Between the CF Card Slots
If both CF card slots contain a CF card, you can switch between them as
necessary.
Press the SLOT SELECT button.
• The access indicator of the selected CF card slot will illuminate in green.
Switching to Other Index Screens
All of the clips on a CF card can be accessed from the clip index screen.
However, you can switch to other index screens that show only clips with
an $ mark ([$ Mark] index screen), clips with a % mark ([% Mark]
index screen), or photos* ([Photos] index screen).
* Photos are saved on the SD card.
1 Press the INDEX button.
• The index screen selection menu appears.
2 Select the desired index screen and then press SET.
• The selected index screen appears.
• Select [Cancel] instead to cancel the operation.
• Press the INDEX button again to return to the clip index screen.
Operating modes:
1 $ mark/% mark (A 102, 132)
2 Orange selection frame
3 Relay recording: Appears when a clip begins on
one CF card and continues on the other. (A 46)
4 Shot mark (A 101, 137)
5 Recording date and time
6 Clip name (A 53)
7 Clip thumbnail (A 138)
8 Currently selected CF card slot (A 45)
9 Clip number / Total number of clips
10 Recording date (month and day only) and time
11 Special recording mode (A 106)
12 Time code of thumbnail
13 Total recording time
14 Embedded custom picture file (A 114)
15 Bit rate and resolution (A 59)
16 Frame rate*
COP
Y