Brother MFC-9130CW - Manual (Page 55)

Control panel setup
49
4
Function table and default factory settings
4
The factory settings are shown in Bold with an asterisk.
NOTE
(For MFC-9130CW, MFC-9140CDN, MFC-9330CDW and MFC-9340CDW)
• Internet Fax, Fax to Server and Scan to E-mail Server functions are available as downloads.
• In order to use this function, please download the necessary firmware from the “Downloads” page for your
model on the Brother Solutions Center at http://solutions.brother.com/.
Main Menu Submenu Menu Selections Options
Network Wired LAN
(DCP-9020CDN,
DCP-9020CDW,
MFC-9140CDN,
MFC-9330CDW
and
MFC-9340CDW)
TCP/IP BOOT Method Auto *
Static
RARP
BOOTP
DHCP
(If you choose Auto , RARP , BOOTP or
DHCP , you will be asked to enter how
many times the machine tries to
obtain the IP address.)
IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000] * 1
Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000] *
1
Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000] *
Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
WINS Configuration Auto *
Static
WINS Server Primary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000] *
Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000] *