Brother MFC-9130CW - Manual (Page 28)

Configuring your machine for a wireless network (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
22
3
h
Enter the SSID name. (For information on how to enter text: see Quick Setup Guide.)
Press
OK .
i
Press Infrastructure when instructed.
j
Choose and press the Authentication method.
Do one of the following:
If you chose
Open System , go to step k.
If you chose Shared Key , go to step l.
If you chose WPA/WPA2-PSK , go to step m.
k
Choose and press the Encryption type None or WEP .
Do one of the following:
If you chose
None , go to step o.
If you chose WEP , go to step l.
l
Enter the WEP key you wrote down in step a. Press OK . Go to step o. (For information on how to enter
text: see Quick Setup Guide.)
m
Choose and press the Encryption type TKIP or AES . Go to step n.
n
Enter the WPA key you wrote down in step a. Press OK . Go to step o. (For information on how to enter
text: see Quick Setup Guide.)
o
To apply the settings, press Yes . To cancel, press No .
Do one of the following:
If you chose
Yes , go to step p.
If you chose No , go back to step g.
p
The machine will attempt to connect to the wireless network you have chosen.
q
If your wireless device is connected successfully, the display shows Connected .
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report. (See Quick Setup Guide: Troubleshooting.)
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.