Brother MFC-9130CW - Manual (Page 32)

Configuring your machine for a wireless network (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
26
3
q
Enter the user ID you wrote down in step a. Press OK . (For information on how to enter text: see Quick
Setup Guide.)
Do one of the following:
If your Authentication method is EAP-TLS, go to step s.
For other Authentication methods, go to step r.
r
Enter the Password you wrote down in step a. Press OK . Go to step s.
s
To apply the settings, choose Yes . To cancel, choose No .
Do one of the following:
If you chose
Yes , go to step t.
If you chose No , go back to step g.
t
The machine will attempt to connect to the wireless network you have chosen.
u
If your wireless device is connected successfully, the display shows Connected .
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report. (See Quick Setup Guide: Troubleshooting.)
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.