Brother MFC-9130CW - Manual (Page 37)

Configuring your machine for a wireless network (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
31
3
Windows Vista
®
/Windows
®
7/Windows
®
8
3
If you are using your computer as a Registrar, follow these steps:
NOTE
• To use a Windows Vista
®
, Windows
®
7 or Windows
®
8 computer as a Registrar, you need to register it to
your network in advance. See the instruction manual that came with your WLAN access point / router.
• If you use Windows
®
7 or Windows
®
8 as a Registrar, you can install the printer driver after the wireless
configuration by following the on-screen instructions. If you want to install the full driver and software
package: see Quick Setup Guide.
1 (Windows Vista
®
)
Click the button and then Network.
(Windows
®
7)
Click the button, and then Devices and Printers.
(Windows
®
8)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click
Settings, and then click Control Panel. In the Hardware and Sound group, click View devices and
printers.
2 (Windows Vista
®
)
Click Add a wireless device.
(Windows
®
7/Windows
®
8)
Click Add a device.
3 Choose your machine and click Next.
4 Type the PIN which the Touchscreen shows in step f, and then click Next.
5 Choose your network and then click Next.
6 Click Close.
h
If your wireless device is connected successfully, the display shows Connected .
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report. (See Quick Setup Guide: Troubleshooting.)
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.