Brother MFC-9130CW - Manual (Page 40)

Configuring your machine for a wireless network (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)
34
3
Using a New SSID
3
If you are using a new SSID then all other devices will connect using the SSID that you assign to the machine
in the following steps. You will need to connect to this SSID from your computer when it is placed in Ad-hoc
mode.
a
Press .
b
Press Network .
c
Press WLAN .
d
Swipe up or down, or press a or b to display Setup Wizard .
Press Setup Wizard .
e
When Enable WLAN? is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press
No .
f
The machine will search for your network and display a list of available SSIDs. Choose
using a or b. Press OK .
g
Enter the SSID name. (For information on how to enter text: see Quick Setup Guide.)
Press
OK .
h
Press Ad-hoc when instructed.
i
Choose and press the Encryption type None or WEP .
Do one of the following:
If you chose
None , go to step k.
If you chose WEP , go to step j.
j
Enter the WEP key. Press OK . Go to step k. (For information on how to enter text: see Quick Setup
Guide.)
NOTE
Your Brother machine supports the use of the first WEP key only.