Brother DCP-395CN User Manual
Page 97
Wireless Configuration for Macintosh using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW,
DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)
88
5
g
Choose Without cable (Advanced) and then click Next.
h
Read the Important Notice. Check the box after you confirm the wireless setting is enabled, and then
click Next.
i
You need to temporarily change your computer’s wireless settings. Follow the on-screen instructions.
Make sure to take note of all the settings such as the SSID or channel of your computer (you will need
them to return your computer back to its original wireless settings), and then click Next.
If you want to configure your machine for the wireless network you have been using, write down your
wireless network settings before configuration.