Brother DCP-395CN - Manual (Page 117)

Control panel setup
108
6
e
Press a or b to choose Status.
Press OK.
f
The current wireless network status will be displayed; Active(11b), Active(11g), or
Connection Fail.
g
Press Stop/Exit.
For Touchscreen models
6
a Press MENU.
b Press Network.
c
Press WLAN.
d
Press a or b to display WLAN Status and then press WLAN Status.
e
The current wireless network status will be displayed; Active(11b), Active(11g), or
Connection Failed.
f
Press Stop/Exit.
Signal
6
This field displays the current wireless network signal strength; Signal:Strong, Signal:Medium,
Signal:Weak or Signal:None.
a Press Menu.
b
Press a or b to choose Network.
Press OK.
c For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW and
MFC-495CW
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
e Press a or b to choose Signal.
Press OK.
f The current wireless network signal strength will be displayed; Signal:Strong, Signal:Medium,
Signal:Weak or Signal:None.
g Press Stop/Exit.