Brother DCP-395CN - Manual (Page 152)

Appendix A
143
A
Installation when using Web Services (Windows Vista
®
)
A
Note
• You must configure the IP address on your machine before you proceed with this section. If you have not
configured the IP address, see Configuring your machine for a network with an Ethernet cable connection
(Not available for MFC-253CW, MFC-255CW and MFC-257CW) on page 10 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• Only printer support is installed with Web Services.
a
Click , then choose Network.
b The machine’s Web Services Name will be shown with the printer icon. Right click the machine you want
to install.
Note
The Web Services Name for the Brother machine is your model name and the MAC Address (Ethernet
Address) of your machine (e.g. Brother MFC-XXXX [XXXXXXXXXXXX]).
c From the pull down menu, click Install.
d When the User Account Control screen appears, do the following.
„ Users who have administrator rights: Click Continue.
„ For users who do not have administrator rights: Enter the administrator password and click OK.
e Choose Locate and install driver software.
f Insert Brother CD-ROM.
g
Choose Don’t search online and then Browse my computer for driver software on your computer.
h
Choose your CD-ROM drive then choose the driver, and then win2kxpvista folder.
i
Choose your language and then click OK to begin installation.