Brother DCP-395CN User Manual
Page 162

Appendix B
153
B
The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.
Network
(Continued)
WLAN
(Continued)
TCP/IP
(Continued)
Node Name
BRWXXXXXXXXXXXX= (your Ethernet
address)
(up to 15 characters)
BRWXXXXXXXXXXXX*
WINS Config
Auto/Static
WINS Server
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
DNS Server
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
APIPA
On/Off
Setup Wizard —
(Choose SSID from list or manually add SSID)
SES/WPS/AOSS —
WPS w/PIN Code —
WLAN Status Status
Active(11b)/Active(11g)/
Connection Failed
Signal
Signal:Strong/Signal:Medium/
Signal:Weak/Signal:None
SSID
(Shows SSID with up to 32 digits)
Comm. Mode
Ad-hoc/Infrastructure
MAC Address
Network I/F
Wired LAN/WLAN
Network Reset
Level1
Level2
Level3
Options1
Options2