Brother DCP-395CN - Manual (Page 23)

Configuring your machine for a network with an Ethernet cable connection (Not available for MFC-253CW, MFC-255CW and
MFC-257CW)
14
2
c
Double-click the unconfigured device.
Windows
®
Macintosh
Note
• If the print server is set to its factory default settings (if you don’t use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the Node Name and MAC Address (Ethernet Address) from the machine’s control panel. See
Node Name on page 100 and MAC Address on page 112.