Brother MW-260 - Manual (Page 5)

5
How to use P-touch Template
1. Printer setting
Set up the initial printer setting by P-touch Template settings
tool, in accordance with the environment of host system
or the terminal unit, which MW-145BT/MW-260/PJ-623/PJ-663
connect to.
(Please refer to
H
P-touch Template Settings Tool User’s Guide in page 6.)
The printer driver must first be installed via a USB connection.
2. Design the template
Design the transferred template by P-touch Editor
(Please refer to P-touch Template Limitations in page 11.)
3. Transfer the templates
Transfer the templates to the printer by
P-touch transfer manager.
(Please refer to MW-Series/PockeJet Software User’s Guide.)
4. Program by P-touch template commands
If any special commands are required to control
the printer, change the terminal program in accordance
with the P-touch Template Command Reference.
(Please refer to P-touch Template Command Reference .)
5. Connect the printer with the terminal unit and print
slips etc.
Transfer the data such as ASCII text from the terminal unit
to templates in the printer , and print the slips etc.
*Printer image in the screen
may differ depending on
your product model.