Brother MW-260 - Manual (Page 4)

4
Introduction
This material provides the necessary information for directly controlling the transferred
templates in MW-145BT/MW-260/PJ-623/PJ-663.
This information is provided assuming that the user has full understanding of the operating
system being used and basic mastery of programming in a developer's environment.
We accept no responsibility for any problems caused by programs that you develop using
the information provided in this material, affecting software, data or hardware, including the
MW-145BT/MW-260/PJ-623/PJ-663, and any problems resulting directly or indirectly from
them. Use this material only if you accept these terms.
This material shall not be reproduced, in part or in full, without prior approval. In addition,
this material shall not be used as evidence in a lawsuit or dispute in a way that is
unfavorable towards our company.
What is P-touch Template?
P-touch Template is the tool to transfer the ASCII
text & binary data from a terminal unit to
transferred template in the printer. Such
transferred data is inserted into text object or
barcode object in a template.
It helps the user develop the printing system which connects directly from the terminal
unit. The types of terminal unit are as below.
Smartphone
Handy terminal
etc.
Notes:
*P-touch Template is not compatible with some terminal units.
*Terminal unit should have an interface to transfer the data.
3. Transfer the data
(Text) from the terminal
unit, and print template.
1. Setting up the printer
through your PC,
in accordance with the
terminal unit.
2. Design the template
by P-touch Editor, and
transfer it to printer.