Brother MW-260 - Manual (Page 30)

8
Control Code List
Commands that can be set or obtained in P-touch Template mode
^PT
5E 50 54 Dynamic Select print start trigger
^PS 5E 50 53 Dynamic Specify print start command text string
^PC 5E 50 43 Dynamic Specify print start received character count
^SS 5E 53 53 Dynamic Specify delimiter
^TS 5E 54 53 Dynamic Select template
^LS 5E 4C 53 Dynamic Specify line spacing with line return
^CC 5E 43 43 Dynamic Change prefix character
^RC 5E 52 43 Dynamic Specify line return command text string
^CN 5E 43 4E Dynamic Specify number of copies
^II 5E 49 49 Initialize
^SR 5E 53 52 Status request
^VR 5E 56 52 Retrieve version Information
^CR 5E 43 52 Line return in object
^OS 5E 4F 53 Specify object selection (object number)
^ON 5E 4F 4E Specify object selection (object name)
^DI 5E 44 49 Direct object insertion
ESC ia 1B 69 61 Dynamic Specify command mode
* The commands mentioned above must be used in P-touch Template mode.
They cannot be used in raster mode or ESC/P mode. (except ESC ia、ESC i!R)