Brother MW-260 - Manual (Page 41)

19
^CN Specify number of copies
[ASCII] ^ C N n1 n2 n3
[Decimal] 94 67 78 nd1 nd2 nd3
[Hexadecimal] 5E 43 4E nh1 nh2 nh3
[Parameters] 0≤n1≤9
0≤n2≤9
0≤n3≤9
[Description]
· Specifies the number of copies to be printed.
(n1*100)+(n2*10)+n3: Number of copies (bytes) (1 to 999)
· The default number of copies is 1.
· This command is a dynamic command.
[Remarks]
· When printing is finished, the number of copies specified with this command returns to the
number of copies (static value) specified from the machine.
[Example]
· To change the number of copies to 100 characters: Since n1=1, n2=0 and n3=0, the
command will be as follows.
^ C N 1 0 0 (5Eh 43h 4Eh 31h 30h 30h)