Brother MW-260 - Manual (Page 18)

18
· When print data is fed, the command mode should be the P-touch Template mode.
· When a template is transferred to the printer , all values specified with dynamic commands
are initialized.
· Printing begins when the print start text string is received, even if the print start trigger is
“when all objects are filled”.
· After printing from P-touch Editor, the command mode changes to ESC/P mode or raster
mode (only raster mode for MW-145BT/MW-260). In order to print a template, select the
P-touch Template mode in the Printer Settings tool or, if the previous mode in the Printer
Settings tool was the P-touch Template mode, turn the printer off, then on again to enter
P-touch Template mode.