Sterlco ST500 Series Central Granulator - Manual (Page 57)

57
SETTINGS AND ADJUSTMENTS
SECTION 4-23
Setting and Adjusting the Rear Chamber Pneumatic Cylinder
RELEASE THE CUTTING CHAMBER
FASTENERS
Turn the lock bolts counterclockwise to loosen
them.
Slide the hold-down clamps upward you until
they are disengaged from the cutting chamber
hatch
RELEASE THE CUTTING CHAMBER
FASTENERS
Turn the actuator screw counter-clockwise to loosen
with a box wrench.
This will release the safety switch on the rear hatch