Sterlco ST500 Series Central Granulator - Manual (Page 24)

24
MACHINE AND CONTROLS
SECTION 2-1
Right Front Quarter View
AT500 Series Granulator -Right Front Quarter View
1. Discharge bin
2. Screen cradle retainers
3. Interlock actuator screw - cutting chamber
4. Safety plates
5. Feed hopper
6. Discharge duct (optional mount to either side)
7. Start/stop pushbuttons are located on the electrical cabinet, not shown. (The electrical cabinet is
optional equipment.)
ST500 Series Granulators The ST500 Series Granulators have a common cutting diameter of
20"(508mm) and a common throat size of 20" (508mm) by widths ranging up to 48" (1220mm).
They are designed for reclamation of large blow-molded and thin-walled injection molded-parts,
films, and fibers.
The machines in the ST500 Series can be fitted with screens having hole sizes to suit the particular
application. The ST500 Series machines conform to ANSI Standards: B 151.11 and NFPA 79.
3
2
1 6
4
5