Sterlco ST500 Series Central Granulator - Manual (Page 50)

50
SETTINGS AND ADJUSTMENTS
SECTION 4-16
Adjusting or Replacing Rotor Knives
SEE SECTION 6-11 PAGE 88 FOR CUTTING CHAMBER
CLOSING INSTRUCTIONS .
RESTART THE GRANULATOR
If necessary to replace the fuses, call an electrician to do it.
UNLOCK AND TURN ON the main power.
Remove the OUT OF SERVICE tag.
Start the granulator by depressing the start pushbutton on the electrical cabinet.
CLOSE THE CUTTING CHAMBER SAFETY
INTERLOCK
Engage the safety interlock by turning the actuator screw
clockwise.
Make sure the screw is fully seated.
When engaged, the interlock closes the electrical control circuit to the
motor and allows the machine to run.