Sterlco ST500 Series Central Granulator - Manual (Page 11)

11
THANK YOU FOR PURCHASING AN STERLING ST500 SERIES GRANULATOR.
READ THIS MANUAL to learn how to operate and service your granulator safely. It covers the family
of granulators called the ST500 Series. This series of Sterling Granulators is designed for the big jobs
in reclamation of large blow-molded and thin walled, injection molded plastic parts as well as film.
This revision of the manual covers the improvements made since the introduction of the ST500 Series
Machines in 2009.
NOTE: This manual covers light maintenance only. No further maintenance should be performed
without first contacting the STERLING Service Department at the mailing address and phone number
shown on page 2.
When calling the factory for service information and parts, please have the model and serial number
of your machine on hand. The serial number is stamped on the plate mounted on the center at the
front of the granulator just below the hopper above the cutting chamber access door.