Sterlco S-150 Digital Dosing Controller - Manual (Page 31)

Digital Dosing Units 31
Step 4:
• Press again and the symbol “s” will light up and the number “5” will be
displayed if you have a blending unit and have invoked this option.
• After “5” flashes on the display, a number in the format xxx.xx will come up on
the display.
• Enter the maintained running time of the blending unit in seconds using the
arrow keys. This is how long the blender will run after each dosing cycle and
should be adjusted for the best possible blend. Too little time may not produce
good dispersion; too much time can cause separation, especially with heavy
concentrates.
Step 5:
• Press again. This will activate the printing option if it is available and the number
“6” will be displayed.
• After the “6” flashes on the screen, a number in the format xxx.xx will come up on the
display.
• By using the arrow keys, you can choose your printer parameters. If you have not
activated this option, skip to the next step .