Sterlco S-150 Digital Dosing Controller - Manual (Page 16)

Digital Dosing Units 16
Basic Input Parameters for Colorblend C-150 with
Extrusion Software (E1._ _ - Older units) or (E2._ _ - newer units)
Hold Stop and Input buttons until “7” flashes
- Enter the input number for the specific motor from the table below.
- This value sets the impulses of the encoder.
Manufacturer Motor Color RPM Input Number
Bauer
Blue
6.4 11739
Bauer
Blue
11.5 6600
Bauer Blue 35.5 2135
Bison
Black
2 65000
Bison
Black
6 25200
Bison Black 12 14103
Bison
Black
38 4387
Press Input button
- When “8” flashes, enter 0.7 for blue Bauer motor.
- Or, enter 0.5 for the black Bison or Colorblend S motor.
- This value sets the nominal current for the motor.