PNI Legacy Comm Board - Manual (Page 20)

PNI Corporation 133 Aviation Blvd., Suite 101, Santa Rosa, CA 95403-1084 USA;, Fax: (707) 566-2261
For the most current specifications, please visit our website at:
www.pnicorp.com
Page 20 of 42
et (Temperature Data Enable)
Enables the temperature data output. Temperature output is not available on all modules. Refer
to the specific module data sheet for more information.
Syntax: et
Response Format: $et={value}*
Valid Values:
e = enabled
d = disabled (default)
Query Syntax:
et?
ex (X Axis Data Enable)
Enables the X-axis data output.
Syntax:
ex
Response Format: $ex={value}*
Valid Values:
e = enabled
d = disabled (default)
Query Syntax:
ex?
ey (Y Axis Data Enable)
Enables the Y-axis data output.
Syntax:
ey
Response Format: $ey={value}*
Valid Values:
e = enabled
d = disabled (default)
Query Syntax:
ey?
CommBoard
Configuration Commands