NORD Drivesystems BU0050 - Manual (Page 4)

NORD DeviceNet Manual Concerning this document
4 Subject to technical amendments BU 0050 GB-3111
Intended use of the frequency inverter
Compliance with the operating instructions is necessary for fault-free operation and the
acceptance of any warranty claims. These operating instructions must be read before
working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
The described optional modules can only be used for the specifically defined frequency
inverter series, use across series is only possible with the SK TU2-
… module with SK 300E
and SK 750E. The use of these modules with other devices is not permitted and can lead to
their destruction.
The described optional modules and the corresponding frequency inverters are devices for
stationary installation in control cabinets or decentral ised structures. All details
regarding technical data and permissible conditions at the installation site must be
complied with.
Commissioning (commencement of the intended use) is not permitted until it has been ensured
that the machine complies with the EMC Directive 204/108/EEC and that the conformity of
the end product meets the Machinery Directive 2006/42/EEC (observe EN 60204).

Getriebebau NORD GmbH & Co. KG, 2011