Asante Technologies 6200 - Manual (Page 86)

System Reset Options
Page 5-39
4 Select one of the options in the above screen
to select the required baud rate and confirm
it by typing
y.
5 Type a to select the Destination Bank.
6 Use any serial communications software like
Procomm Plus, HyperTerminal, ZTerm, etc.,
to download the image file. Follow the
instruction manual of the serial communica-
tions software for file transfer instructions.
∆
Note: The terminal on which serial communica-
tions software is running must have the same baud
rate as the Switch console baud rate. The connec-
tion between the terminal and the switch Console
port is RS232C straight-through cable.
7 Type d to download to the selected destina-
tion bank or b to download and reset.
8 Type q to return to the previous menu after
performing a successful download.
∆
Note: The baud rate default for Console manage-
ment is 9600 bps. If you select a baud rate for the
console port, other than 9600 bps, the screen will
display garbage data until the connected terminal
is set to the same baud rate as the console.
System Reset Options
The System Reset Options Menu allows you to reset the
IntraSwitch by performing a “warm” reboot. It also allows you
to schedule a reset up to 24 hours in advance.
To reset the IntraSwitch, type r in the Configuration Menu. A
screen similar to Figure 5-16 appears.
6216M Book Page 39 Wednesday, January 27, 1999 5:26 PM