Asante Technologies 6200 - Manual (Page 36)

Configuring for Management
Page 2-11
For information on changing the password,
see “Changing the Password” in Chapter 5.
6 Type i to open the Switch IP Configuration menu.
7 Type i to select the option “Set IP Address.”
8 Type the IP address to be assigned to the
IntraSwitch at the prompt.
∆
Note: Depending on your network configu-
ration, you may also need to set subnet mask
and default gateway (router) information.
See “System IP Configuration” in Chapter 5
for instructions.
9 Press Return .
10 Type q to return to the Configuration Menu.
The IntraSwitch is configured with an IP address and can now
be managed via in-band access. See Chapter 4, “Setting Up For
Management” for more information.
6216M Book Page 11 Wednesday, January 27, 1999 5:26 PM