Asante Technologies 6200 - Manual (Page 149)

VLAN Management
Page 9-12
When the port involved is a Tagged port, the
port's original VLAN Group membership is not
revoked.
Configuring Man-
agement VLAN
Take the following steps to configure a management VLAN.
1 Type g on the VLAN configuration Menu. This
displays the prompt:
Enter VLAN Groups separated by space
(0 means ALL) >
2 Type 0 to make management belong to all
VLANs in the system or enter specific VLAN
Group numbers , following each by a space.
3 Press return . This displays a confirmation mes-
sage.
4 Type y to accept and n to cancel the operation.
If y was selected, the management VLAN will be changed
according to the request. The changes are reflected on the
screen next to the field
MGMT Access: in each VLAN Group
screen.
∆
Note: The VID, VLAN Name, VLAN Members
and MGMT ACCESS information are stored in a
Non-Volatile Database so you do not have to re-
configure them each time the system starts.
Displaying System
VLAN Summary
To display the system VLAN summary, press v in the VLAN
Configuration Menu. This brings up the screen which shows all
VLAN Groups and their member information. The VID of each
VLAN Group and switch management accessibility information
are also displayed on this screen.
Displaying Port
VLAN Map
To display a summary of the system’s port VLAN association,
press
l in the VLAN Configuration Menu. This brings up the
screen which shows all Ports and their VLAN Group association
information.
6216M Book Page 12 Wednesday, January 27, 1999 5:26 PM