Asante Technologies 6200 - Manual (Page 24)

Factory Defaults
Page 1-9
Factory
Defaults
The IntraSwitch is shipped with the following factory default
settings:
Table 1-2 Factory Default Settings
Connecting 10Base-
FL port (optional MII
modules)
Dual 62.5/125 micron graded-index
multimode fiber optic cable fitted with ST
connectors.
Connecting to the
Console port
Straight-through RS-232 cable with a 9-pin
male D-subminiature connector.
Rack-mounting the
IntraSwitch
Phillips screwdriver for mounting the two
rack brackets on the unit.
Action Tool/Material Required
Configuration Default Setting
IP address 0.0.0.0
Subnet Mask 0.0.0.0
Default Gateway 0.0.0.0
Switching Mode
Intelligent Forwarding (Automatic Fragment
Free/Store and Forward)
10/100 Ports Auto-negotiation enabled; auto-negotiates to
10Mbps or 100Mbps, half duplex
Spanning Tree Enabled
BC Storm Threshold 7000 packets per second
Console Baud Rate 9600 Baud
Password Asante
6216M Book Page 9 Wednesday, January 27, 1999 5:26 PM