Asante Technologies 6200 User Manual
Page 71
Console Management
Page 5-24
2
Select the port to be enabled or disabled by
typing
s, entering the port’s number, and
pressing
Return
.
3
Type
e to toggle the port’s connection to
enabled
or
disabled
, as desired.
The port’s status is changed. The new status
is displayed at the top of the screen next to
Port Status:
.
Configuring Duplex Mode
Full duplex mode allows a port to transmit and receive at
the same time.
▲
Important! To use full duplex mode, the
device to which the port is connected must sup-
port and be configured for full duplex mode.
∆
Note: To configure a port for duplex mode,
first disable auto-negotiation, as described in
the next section.
1
Open the Port Management Menu by typing
p on the Configuration Menu.
2
Select the port to be configured for full
duplex mode by typing
s, entering the port’s
number, and pressing
Return
.
3
Type
d to toggle the port’s duplex mode half to
full, or full to half.
The port’s mode is changed and is displayed
at the top of the screen next to
Link Status
.
6216M Book Page 24 Wednesday, January 27, 1999 5:26 PM