Dwyer PUX2 - Manual (Page 34)

-32-
[KIND]
[VELOCITY]
[Collection]
Moment
㧦Displays data by each read.
Moving Average 㧦Displays data in moving average with the number of times set by channel in each read data.
[MODE]
SENSOR-U
㧦Displays only upstream sensor that connected cable with the upstream side.
SENSOR-D 㧦Displays only downstream sensor that connected cable with the upstream side.
SENSOR-U/D 㧦Displays both upstream/downstream sensor above.
[Moment]
VEL. / F.RATE
㧦Displays flow velocity or flow rate with each read.
[RAS]
RAS...Displaying RAS with each read.
[DEMO feature]
Reads the file logged by flow rate or [SAVE As CSV], displays the flow velocity profile.
[Check Box]
Displays repeatedly by setting check box to ON (“
ښ”).G
[OFFSET Calculation]
Displays flow velocity profile detected by the sensor on the upper stream side and that on the lower stream side overlapped
at the center of the piping.
x Click the [START] button to read in the specified cycle and click the [Stop] button to cancel the operation.
x Click the [SAVE As CSV] button to save the data in the CSV file.
For saving format, refer to “16.5.3 Flow Velocity Profile” in the manual.
Bulletin F
-9-PUX2-S