Dwyer PUX2 - Manual (Page 3)

-1-
1. OUTLINE
1.1. COPYRIGHT OF THIS SOFTWARE
x The copyright of this software belongs to
the manufacturer. No part of this software may be reproduced or
transmitted in any form.
1.2. GENERAL
x Using this software, you can set, read and display relevant graphs of the PUX2 on your PC easily.
1.3. SYSTEM REQUIREMENTS
1.3.1. PC main unit
x AT compatible-type with CPU Pentium IV 1 GHz/Celeron 1 GHz or more installed, display resolution of 1024 × 768, and
use of small font recommended and CD-ROM drive.
1.3.2. Memory capacity
x 128 MB or more (256 MB or more recommended) [52 MB memory or more for free space required]
1.3.3. Interface
x More than one USB port is necessary.
1.3.4. OS
x Microsoft Windows 2000 Professional (SP4 or more)
x Microsoft Windows XP Professional (SP2 or more)
x Microsoft Windows Vista Business: Use it in Basic mode.
It is not available for Windows Aero.
1.4. SCOPE OF DELIVERY
CD-ROM: 1
x Setup disk: Installing software to PC
x Instruction manual
Bulletin F
-9-PUX2-S