Dwyer PUX2 - Manual (Page 23)

-21-
7. Logger data
Click the ”Logger data” button on the Menu screen, and the following screen appears.
Fig. 7-1 LOGGER DATA screen
Table 7 −1 LOGGER DATA screen specifications
Item Contents
Logger data list
Name list of the logger data numbers from 0 to 100. You cannot
select multiple data. To select a logger data in the list to be read,
check the check box of the logger data.
Logger data number Displays the logger data number selected in the list.
Number of logger data registered Displays total number of logger data files registered.
Logger data number Setting
To display a [LOGGER DATA LIST] of an arbitrary first and
subsequent data, manually input the first logger data number.
Logger data list display
Redisplays the logger data list from the [LOGGER DATA No]
(setting).
Storage
Specify the storage area for logger data during read operation.
If specified, press the [READ] button to save the file.
Name of save files
Full pathname including a name of a destination file to save data that
is specified in the “Select a destination to save the data” is displayed.
You cannot directly edit this item. The extension of save files is in
CSV format.
CAUTION
x The time of reading logger data to PC will take about 25 min. in case of 1.6MB.
The reading will take time for a while; regularly reading SD memory card directly via a PC is
recommended.
Bulletin F
-9-PUX2-S