Bulletin f -9-pux2-s – Dwyer PUX2 User Manual

Page 27

Text mode
Original mode

-25-

Table 8

−3 Sensor specifications

Item Contents

SENSOR MOUNT

Select from Z method and V method.

TRANS. VOLTAGE

Select from 20, 40, 80 and 160.

SENSOR TYPE

Select from
PSX2A, PSX2B/SX2A, PSX2HT, PSX2C, PSX2D, PSX2E, SX1A,
SX2B, SX1B, SX1C, SX3A, SX3B.

Table 8

−4 Zero point calibration specifications

Item Contents

ZERO ADJUSTMENT

Perform zero point calibration using the Clear and the Adjust button.
ZERO ADJUSMENT is different from the method below of other
parameters.
Click the [Setting] button and display the confirmation message
screen.

x The site name which corresponding to reading/writing of information is displayed in “SITE NAME”.

Bulletin F

-9-PUX2-S