Caleffi 6000 - Manual (Page 27)

Characteristic components
WARNINGS
The following instructions must be read and understood before installing,
commissioning and maintaining the electronic mixing valve.
The safety symbol is used in this manual to draw attention to the safety instructions. The meaning of
this symbol is as follows:
CAUTION!
YOUR SAFETY IS INVOLVED. FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN A SAFETY HAZARD.
- The electronic mixing valve must be installed by a licensed technician in accordance with national regulations
and/or relevant local requirements.
- If the electronic mixing valves are not installed, commissioned and maintained correctly in accordance with the
instructions provided in this manual, they may not work properly and may endanger the user.
- Make sure that all connection fittings are watertight.
- When connecting water pipes, make sure that threaded connections are not mechanically overstressed. Over
time this may result in breakages, with consequent water leaks which could harm people and/or damage
property.
- Water temperatures higher than 50°C may cause severe burns. When installing, commissioning and maintaining
electronic mixing valves, take the necessary precautions so that these temperatures will not endanger people.
CAUTION: Risk of electric shock. The back panel and mixing valve contain live
circuits. Remove the electric supply before carrying out any work. Failure to follow
these instructions could result in a safety hazard.
2
Product range
6000 Series Electronic mixing valve with programmable thermal disinfection. Threaded version sizes 3/4” - 1” - 1 1/4” - 1 1/2” - 2”
6000 Series Electronic mixing valve with programmable thermal disinfection. Flanged version sizes DN 65 and DN 80
1) LEGIOMIX ® digital regulator
2) Mixing valve
3) Mixing valve actuator
4) Mixed water flow probe
5) Return probe (recirculation)
6) Mixed water flow temperature gauge
7) Actuator fixing clip