West Control Solutions Pro-4 - Manual (Page 38)

Configuration level
Configuration parameters 38 KS 90-1 / KS 92-1
Name Value range Description Default
fOut Forcing OUT3 (only visible with BlueControl!) 0
0 No forcing
1 Forcing via serial interface
Out.5
/
Out.6
Configuration parameters Out.2 = Out.1 except for: Default Y.1 = 0 Y.2 = 0
g
Method of operation and usage of output Out.1 to Out.6:
Is more than one signal chosen active as source, those signals are OR-linked.
LOGI
Name Value range Description Default
L_r
Local / Remote switching (Remote: adjusting of all values by
front keys is blocked)
0
0 no function (switch-over via interface is possible)
1 always active
2 DI1 switches
3 DI2 switches (basic instrument or OPTION)
4 DI3 switches (only visible with OPTION)
5 è - key switches
SP.2 Switching to second setpoint SP.2 0
0 no function (switch-over via interface is possible)
2 DI1 switches
3 DI2 switches (only visible with OPTION)
4 DI3 switches (only visible with OPTION)
5 è - key switches
SP.E
Switching to external setpoint SP.E 0
0 no function (switch-over via interface is possible)
1 always active
2 DI1 switches
3 DI2 switches (only visible with OPTION)
4 DI3 switches (only visible with OPTION)
5 è - key switches
Y2
Y/Y2 switching 0
0 no function (switch-over via interface is possible)
2 DI1 switches
3 DI2 switches (only visible with OPTION)
4 DI3 switches (only visible with OPTION)
5 è - key switches
6 Ò - key switches