Metex 3200U Ultrasonic Flow & Level Monitor - Manual (Page 8)

Vol or Hrt modes will also prompt you to enter a maximum volume. Press
È from
MxVol to position
the cursor under the first digit. Use
È or Ç to change the digits or decimal point to enter the actual
maximum volume you will be measuring. Press
Æ to return to
MxVol and
È .
You can enter values up to 6 digits (e.g. 150,000 liters). When the measured tank volume exceeds 4
digits, the Ultrason will automatically display a 'multiplier' on the lower alphanumeric display.
FLOW mode will offer the additional selection of time units:
s - seconds
min - minutes
hr - hours
d - day
Note: The Ultrason will display Er:ILLEGAL UNITS if your choice of Units exceeds a maximum
value of 9,999,999. Use US MGD, Imp MGD or m3/d so that Units will be 9,999,999 or less. Press
È
to Store and
Æ to
Yes . Then press
È or Ç to store all your
UNITS/MODE selections.
AquaMetrix
Ultrason
Page 8
UNITS 1000L
= 150,000 Liters
A M qua etrix