KROHNE OPTISYS TUR 1050 EN - Manual (Page 12)

2
DEVICE DESCRIPTION
12
OPTISYS TUR 1050
www.krohne.com 11/2012 - 4002444301 MA OPTISYS TUR 1050 R02 en
RS 485 interface
In addition to the Modbus communication the device can operate in two other RS 485 modes:
• Online: the device operates as a small SCADA system (Supervisory Control and Data
Acquisition) with an optional software package (to get this package contact the manufacturer
or your local sales office). This system allows the connection of up to 255 devices for data
logging which all have to be an OPTISYS TUR 1050. Furthermore this system offers a direct
interface with common database and spreadsheet software.
• Simple: the device can provide basic communications with the help of simple programs.
Examples for such programs are Hilgraeve hyperterminal (included in most Microsoft
Windows packages) or Visual Basic.
Ultrasonic cleaning
This feature helps to clean the ultrasonic cuvette continuously. The system works by sending an
ultrasonic frequency through spring connections in the upper part of the device to a piezo
transducer at the bottom of the ultrasonic cuvette.
The ultrasonic cleaning can increase the time between cleanings significantly. However it cannot
substitute the manual cleaning entirely.
2.3 Nameplates
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
Infrared version
Figure 2-4: Example for nameplate for infrared version
1 Manufacturer and address
2 WEEE waste bin symbol
3 ETL symbol
4 CE symbol
5 Logistics numbers
6 Electrical data
7 Serial number
8 Device designation and order code